Khidkie™ Aluminium Systems
The KHIDKIE™ Ventana Series is a deep-frame, heavy-duty aluminium sliding system engineered for large openings and demanding architectural applications. Built on a robust 29mm profile platform, Ventana delivers exceptional structural rigidity, smooth sliding performance, and long-term dimensional stability. Designed to support multi-track configurations, integrated grills, mesh systems, and DGU glazing, the Ventana Series enables wider spans, higher loads, and refined aesthetics—making it an ideal solution for premium residential and light commercial spaces where strength, scale, and performance matter.
The Ventana Series is engineered for projects where structural strength, smooth sliding performance, and long-term dimensional stability are critical. Built on a deep 29mm aluminium profile platform, this system is designed to support larger spans, heavier shutters, and multi-track configurations while maintaining precise alignment and effortless operation over time.
The Ventana Series is ideally suited for large sliding windows and doors in balconies, living rooms, villas, apartments, cafés, showrooms, and light commercial spaces where wider openings, higher load capacity, and smooth sliding motion are required. Its deep-frame construction makes it particularly effective in applications where standard sliding systems lack rigidity and stability.
Fabricators prefer the Ventana Series for its clear system logic, strong profile geometry, and consistent on-site performance. The series supports multiple track options, grill and mesh integration, and DGU-ready configurations, enabling accurate fabrication, controlled installation, and reliable results in both residential and commercial projects.
A deep-frame, heavy-duty aluminium sliding system engineered for large openings, higher load capacity, and long-term dimensional stability.
The 29MM Ventana Series from Khidkie™ is a structurally driven sliding system developed around dedicated deep-track and frame profiles rather than lightweight or adapted sliding sections. The system begins with purpose-built 29MM 2-Track and 3-Track Frames, designed to provide higher rigidity, improved load distribution, and accurate shutter alignment across wide openings.
Structural load management in the Ventana Series is handled through its deep 29mm bottom track profiles, which are engineered to support heavier shutters while maintaining smooth and stable sliding motion. These bottom tracks work in coordination with matching top profiles and verticals to ensure consistent movement, controlled shutter travel, and long-term straightness under repeated operation.
The system supports multiple shutter configurations based on performance and glazing requirements. The 29MM Standard Shutter and 29MM Square Shutter are used for single-glazed applications where clean aesthetics and balanced weight are required, while the 29MM DGU Shutter is proportioned to accommodate double-glazed units for improved acoustic performance, thermal insulation, and structural stiffness. Each shutter profile is designed to remain rigid under load while enabling smooth linear sliding.
Shutter interaction, sealing, and alignment are controlled using a range of dedicated interlock profiles rather than universal meeting sections. The series includes 29MM Standard Interlock, Slim Interlock, KPA Interlock, and DGU-specific Interlocks, allowing the system to be configured precisely based on shutter weight, glazing type, and performance requirements.
The Ventana Series further supports integrated architectural elements through dedicated profiles such as Grill-Compatible Frames, 3-in-1 Frames, Track Caps, Meeting Patti, H Adapters, and 29MM Middle Profiles. These components ensure clean finishing, structural continuity, and controlled transitions across multi-shutter and multi-track configurations.
Unlike lightweight sliding systems, the Ventana Series is engineered around structural depth and
controlled linear motion rather than minimal profile thickness.
Every component — frames, shutters, interlocks, and accessories —
is designed to function as a unified system, ensuring:
• High load-bearing capacity for large shutters
• Smooth and stable sliding motion over time
• Accurate shutter alignment across wide spans
• Compatibility with grills, mesh systems, and DGU glazing
• Long-term durability in demanding residential and commercial use
With its deep 29mm frame architecture, multiple track options, heavy-duty shutter profiles, and system-matched accessories, the KHIDKIE™ Ventana Series is ideally suited for large sliding windows and doors in balconies, villas, apartments, cafés, showrooms, and light commercial spaces where strength, scale, and smooth sliding performance are functional requirements — not optional features. The Ventana Series is not a lightweight sliding adaptation; it is a purpose-built heavy-duty sliding system designed for precision, stability, and architectural scale.
Purpose-built 29mm deep track and frame profiles engineered for higher rigidity, better load distribution, and long-term stability.
Supports multiple sliding layouts including 2-track, 3-track, one-side open, and wide-span configurations for flexible design planning.
Designed to support standard glass shutters as well as double-glazed units for improved acoustic, thermal, and structural performance.
Multiple interlock options including standard, slim, KPA, and DGU-specific interlocks ensure precise shutter alignment and sealing.
Compatible with grill-integrated frames, 3-in-1 systems, and accessory profiles without compromising sliding smoothness.
| Category | Specification |
|---|---|
| System Type | Heavy-Duty Aluminium Sliding System |
| System Depth | 29 mm (Deep-Frame Sliding Architecture) |
| Frame Composition | 2-Track & 3-Track Bottom Frames with Matching Top & Vertical Profiles |
| Load Distribution | Bottom-Supported Sliding with Balanced Top Guidance |
| Opening Mechanism | Linear Sliding Motion |
| Shutter Configuration | Multiple Sliding Shutters (Project Dependent) |
| Shutter Options | Standard Shutter, Square Shutter, DGU Shutter |
| Interlock System | Standard Interlock, Slim Interlock, KPA Interlock, DGU & DGU-KPA Interlocks |
| Accessory Profiles | Track Caps, Meeting Patti, H Adapter, Middle Profile, Grill-Compatible Frames, 3-in-1 Frame |
| Movement Control Logic | Stable Linear Sliding with Controlled Shutter Alignment |
| Recommended Shutter Weight Range | Medium to Heavy (Based on Track & Interlock Selection) |
| Maximum Recommended Span | Suitable for Wide Openings with Multiple Sliding Shutters |
| Hardware Dependency | Heavy-Duty Sliding Rollers & Guides (System Matched) |
| Material | High-Grade Architectural Aluminium Alloy |
| Finish Options | Anodized, Powder Coated, Matte, and Custom Architectural Finishes |
| Primary Applications | Large Sliding Windows & Doors, Balconies & Living Areas, Villas & Apartments, Cafés & Showrooms, Light Commercial Spaces |
Shutters glide smoothly along deep 29mm tracks with controlled movement, stable alignment, and long-term reliability.
Purpose-built 2-track and 3-track frames designed for higher rigidity, better load distribution, and wider openings.
Engineered to handle heavier shutters using bottom-supported sliding logic with balanced top guidance.
Multiple interlock options ensure accurate shutter meeting, improved sealing, and consistent alignment across wide spans.
Supports standard glass and double-glazed units, allowing enhanced acoustic, thermal, and structural performance.
Available in anodized, powder-coated, matte, and custom architectural surface finishes.
*System performance depends on correct shutter sizing, appropriate track and interlock selection, and precise fabrication and installation practices.
Complete range of profiles and components engineered for the KHIDKIE™ 29MM Ventana heavy-duty sliding system.
Deep 2-track bottom frame with integrated cover profile, designed for smooth sliding, improved rigidity, and a clean architectural finish in premium installations.
Reinforced 2-track sliding frame with cover support, engineered to handle heavier shutters while maintaining consistent alignment and smooth movement.
Standard 29mm deep-frame sliding profile providing balanced strength, reliable shutter movement, and long-term dimensional stability.
Specialised 2-track frame allowing one-side sliding operation, ideal for layouts requiring directional opening with controlled shutter travel.
Heavy-duty 3-track sliding frame with plain cover, designed for wider openings, multiple shutters, and enhanced ventilation planning.
Reinforced 3-track frame engineered to support heavier shutter combinations while maintaining smooth, controlled sliding across wide spans.
Standard 3-track Ventana frame optimised for multi-shutter configurations where strength, alignment, and smooth operation are critical.
One-side open 3-track sliding frame designed for selective opening layouts without compromising structural balance or shutter control.
Integrated 2-track frame with grill provision, enabling safety and ventilation while maintaining smooth sliding window operation.
Multi-functional frame supporting glass, grill, and mesh systems in a single structure, reducing fabrication complexity and installation time.
Ultra heavy-duty 3-track grill frame designed for high-load applications requiring maximum strength and long-term durability
Standard sliding shutter profile engineered for smooth operation, balanced weight distribution, and clean visual proportions.
Square-edge shutter profile offering a sharper, modern appearance while maintaining structural rigidity and smooth sliding action.
Heavy-duty shutter profile designed to accommodate double-glazed units for improved thermal insulation, acoustic control, and stiffness.
Standard interlock profile ensuring accurate shutter meeting, controlled overlap, and reliable sealing during sliding operation.
Slim-profile interlock designed for minimal sightlines while maintaining precise shutter alignment and smooth engagement.
Reinforced KPA interlock profile developed for heavier shutters and high-load sliding applications.
Interlock profile specifically proportioned for double-glazed shutters, ensuring strength, sealing, and alignment under higher loads.
Heavy-duty interlock combining DGU compatibility with KPA reinforcement for maximum shutter stability and load handling.
Finishing cap designed to cover exposed track edges, improving aesthetics while protecting the sliding channel.
Alternative track cap profile providing clean edge termination and enhanced visual continuity.
Vertical meeting profile ensuring proper shutter overlap, improved sealing, and smooth interaction between sliding panels.
Structural adapter used to connect and transition between Ventana profiles while maintaining alignment and load continuity.
Central support profile used in multi-shutter layouts to improve rigidity, alignment, and long-span performance.
We supply genuine Ventana profiles with premium finishing and pan-India delivery. Share your requirement — our team will guide you with the right combinations.